Plates and sheets - Hot rolled

Width thickness tolerances for Hot-rolled Sheets/Plates

EN 485-3:2005

 Alloy group: EN AW-1050A/EN AW-3003/EN AW-5005/EN AW-5052/ EN AW- 5754/EN AW-5083/EN AW-6082/EN AW-7075

 

Thickness Width range Tolerance
Min Min mm Tolerance Type
2.5 4 0 1250 0.28 +/-
2.5 4 1250 1600 0.28 +/-
2.5 4 1600 2000 0.32 +/-
2.5 4 2000 2500 0.35 +/-
2.5 4 2500 3500 0.4 +/-
4 5 0 1250 0.3 +/-
4 5 1250 1600 0.3 +/-
4 5 1600 2000 0.35 +/-
4 5 2000 2500 0.4 +/-
4 5 2500 3500 0.45 +/-
5 6 0 1250 0.32 +/-
5 6 1250 1600 0.32 +/-
5 6 1600 2000 0.4 +/-
5 6 2000 2500 0.45 +/-
5 6 2500 3500 0.5 +/-
6 8 0 1250 0.35
6 8 1250 1600 0.4 +/-
6 8 1600 2000 0.4 +/-
6 8 2000 2500 0.5 +/-
6 8 2500 3500 0.55 +/-
8 10 0 1250 0.45 +/-
8 10 1250 1600 0.5 +/-
8 10 1600 2000 0.5 +/-
8 10 2000 2500 0.55 +/-
8 10 2500 3500 0.6 +/-
10 15 0 1250 0.5 +/-
10 15 1250 1600 0.6 +/-
10 15 1600 2000 0.65 +/-
10 15 2000 2500 0.65 +/-
10 15 2500 3500 0.8 +/-
15 20 0 1250 0.6 +/-
15 20 1250 1600 0.7 +/-
15 20 1600 2000 0.75 +/-
15 20 2000 2500 0.8 +/-
15 20 2500 3500 0.9 +/-
20 30 0 1250 0.65 +/-
20 30 1250 1600 0.75 +/-
20 30 1600 2000 0.85 +/-
20 30 2000 2500 0.9 +/-
20 30 2500 3500 1 +/-
30 40 0 1250 0.75 +/-
30 40 1250 1600 0.85 +/-
30 40 1600 2000 1 +/-
30 40 2000 2500 1.1 +/-
30 40 2500 3500 1.2 +/-
40 50 0 1250 0.9 +/-
40 50 1250 1600 1 +/-
40 50 1600 2000 1.1 +/-
40 50 2000 2500 1.2 +/-
40 50 2500 3500 1.5 +/-
50 60 0 1250 1.1 +/-
50 60 1250 1600 1.2 +/-
50 60 1600 2000 1.4 +/-
50 60 2000 2500 1.5 +/-
50 60 2500 3500 1.7 +/-
60 80 0 1250 1.4 +/-
60 80 1250 1600 1.5 +/-
60 80 1600 2000 1.7 +/-
60 80 2000 2500 1.9 +/-
60 80 2500 3500 2 +/-
80 100 0 1250 1.7 +/-
80 100 1250 1600 1.8 +/-
80 100 1600 2000 1.9 +/-
80 100 2000 2500 2.1 +/-
80 100 2500 3500 2.2 +/-
100 150 0 1250 2.2 +/-
100 150 1250 1600 2.2 +/-
100 150 1600 2000 2.7 +/-
100 150 2000 2500 2.8 +/-
150 200 0 1250 2.8 +/-
150 200 1250 1600 2.8 +/-
150 200 1600 2000 3.3 +/-
150 200 2000 2500 3.3 +/-