Aluminium Certificates
Table with certificates:
EN 10204 Reference |
Designation of the document type | Document content | Document validated by |
Type 2.1 | Declaration of compliance wih the order | Statement of compliance with the order | The manufacturer |
Type 2.2 | Test report | Statement of compliance with the order, with indication of results of non-specific inspection | The manufacturer |
Type 3.1 | Inspection certificate 3.1 | Statement of compliance with the order, with indication of results of specific inspection | The manufacturer´s authorized inspection representative independent of the manufacturing department |
Type 3.2 | Inspection certificate 3.2 | Statement of compliance with the order, with indication of results of specific inspection | The manufacturer´s authorized inspection representative independent of the manufacturing department and either the purchaser´s authorized inspection representative or the inspector designated by the official regulations |
Example of a certificate:
Down below an example of a certificate issued for customer regarding aluminium flat bar 80 x 10 mm:
#1. Certificate issued 31.10.2009 according to EN 10204. Certificate type 3.1
#2. Information about product, dimension, alloy, temper.
#3. Information about product´s alloy composition
#4. Mechanical results