Alloy usage

Name Alloy type Usage
EN AW-1050A Aluminium

It is the most pure form of aluminium and the most common plate alloy. The alloy has a good property regarding bending and welding, and it is suitable for surface treatment.

It contains 99.5 % aluminium, and they mainly produce it in thickness from 0.5 mm - 6 mm.

EN AW-1050A DDQ:

It contains 99,5% aluminum and is produced in a very soft temper, making it suitable for deep drawing applications. Mainly produced in thickness 1,00 mm, 1,25 m, 1,05 mm and 2,00 mm.

EN AW-2007 Aluminium

A copper alloy that typically contains between 4.0 and 5.0 % copper, and it is suitable for producing machine parts, bolts and rivets. It looks very much like EN AW-2011, but it is yet a bit harder. It is a short-chipped alloy, which is suitable for treatment, threads and high machining speeds. The alloy has a low corrosion resistance and is not suitable for welding because of the high content of copper. It is not approved by the ROHS.

EN AW-2007 Cast Aluminium

Like EN AW-2007, but with less tensions and thus more form stabile.

EN AW-2011 Aluminium

A copper alloy that typically contains between 4.0 and 5.0 % copper, and it is suitable for producing machine parts, bolts and rivets. It looks very much like an EN AW-2007, but it is a bit softer. It is a short-chipped alloy, which is suitable for treatment, threads and high machining speeds and gives a shiny surface after treatment. It has a high strength against metal fatigue. The alloy has an inferior corrosion resistance, and it is not suitable for welding because of the high content of copper. It is possibly approved after the ROHS.

EN AW-2014 Aluminium

A copper alloy that typically contains between 4.0 and 5.0 % copper. It is a short-chipped alloy, which is suitable for treatment, and it has a high strength and is thereby as EN AW-2011 and EN AW-2007. It is harder than an EN AW-2011. Typically, you use the alloy for military purposes and for the aviation industry. It is approved after the ROHS. 

EN AW-2017A Aluminium

A copper alloy with a high content of copper. It is a short-chipped alloy, which is suitable for treatment. The alloy has a low corrosion resistance, and it is not suitable for welding because of the high content of copper. It is not suitable for decorative anodising

EN AW-2024 Aluminium

A copper alloy with high content of copper. It is a short-chipped alloy, which is suitable for treatment. The alloy has a low corrosion resistance, and it is not suitable for welding because of the high content of copper. It is not suitable for decorative anodizing. 

EN AW-3003 Aluminium

A manganese alloy with a high corrosion resistance. The alloy has an average strength and is suitable for welding and bending.

EN AW-3005 Aluminium

A manganese alloy with a high corrosion resistance. The alloy has an average strength and is suitable for welding and bending.

EN AW-3103 Aluminium

A manganese alloy with a high corrosion resistance. The alloy has an average strength and is suitable for welding and bending.

EN AW-3103 Stucco Aluminium
EN AW-3105 Aluminium

A manganese alloy with a high corrosion resistance. The alloy has an average strength and is suitable for welding and bending.

EN AW-5005 Aluminium

It is good for machining and bending and has a high corrosion resistance and good for welding.

The alloy is well suited for decorative anodizing, but the colour may vary.

It is possible to get specific products for high quality facades.

EN AW-5005 (Composite Panel) Aluminium

Er god til bearbejdning og bukning, og har en høj korrosionsbestandighed

EN AW-5005A Aluminium

It is good for machining and bending and has a high corrosion resistance and good for welding. The alloy is very suitable for decorative anodising.

EN AW-5019 Aluminium
EN AW-5052 Aluminium

It is easy processing and has a high corrosion resistance and good for welding. The alloy is not suitable for decorative anodising. 

EN AW-5083 Aluminium

It is sea water resistant and has an average strength, high corrosion resistance and good for welding Medium for anodizing

 

EN AW-5083 Cast Aluminium

A moulded and less tensed alloy and its extremely suitable for machining.  We stock the alloy with two different surfaces. One with surface milling cut and foil, and suitable, when no finish of the thickness is needed. The other one is not treated and therefore, it is the most suitable for project, where all sides will be treated. Remember that we have a servicecenter that offers sawing on the dimensions that you need.

 

EN AW-5083 Cast Milled Aluminium
EN AW-5086 Aluminium

It is sea water resistant and has an average strength, high corrosion resistance and good for welding Medium for anodizing.

EN AW-5186 Aluminium
EN AW-5754 Aluminium

It is sea water resistant and has an average strength, high corrosion resistance and good for welding Medium for anodizing.

EN AW-5754 Cast Aluminium

Like EN AW-5754, but has better form stability and more suitable for processing. It can also be supplied as precision milled surface and produced to achieve best properties for anodizing.

EN AW-6005A Aluminium

It is an alloy with an average corrosion resistance and good for welding. The alloy strength is higher than the one of EN AW-6063.

EN AW-6026 Aluminium

It is a short-chipped alloy with a high strength and average corrosion resistance and medium for welding. Medium for anodizing.  

EN AW-6026 LF Aluminium
EN AW-6060 Aluminium

Is suitable for anodizing, and has a high corrosion resistance and good for anodizing. The alloy is suitable for welding.

EN AW-6061 Aluminium

Is suitable for anodizing, and has a high corrosion resistance and good for anodizing. The alloy is suitable for welding.

EN AW-6063 Aluminium

Is suitable for anodizing, and has a high corrosion resistance and good for anodizing. The alloy is suitable for welding.

EN AW-6073 Aluminium

Is a variant of the EN AW-6082, and it is better for anodizing than EN AW-6082, since the aluminium with this alloy gets a more homogeneous surface.  

EN AW-6082 Aluminium

Has a high strength and a good corrosion resistance. The alloy is good for welding, and you can anodize it. 

EN AW-6082 Cast Aluminium

Like EN AW-6082, but more form stabile and is suitable for processing. The mechanical properties are lower than EN AW-6082 T6.

 

EN AW-6101A Aluminium
EN AW-6101B Aluminium

Is suitable for ornamental anodizing, and has a high corrosion resistance and good for anodizing. The alloy is suitable for welding.

EN AW-6262A Aluminium
EN AW-7010 Aluminium

Is a short-chipped alloy with a very high strength. The alloy has a low corrosion resistance and a low welding- and anodizing level.

EN AW-7020 Aluminium

Is a short-chipped alloy with a very high strength. The alloy has a low corrosion resistance and a low welding- and anodizing level.

EN AW-7021 Plancast Plus Aluminium

Short-chipped alloy with a very high strength. Less tensions than other tooling alloys. This alloy has moderate corrosion resistance and is suitable for welding. Furthermore, it is available in thickness up to 470 mm.

EN AW-7075 Aluminium

Is a short-chipped alloy with a very high strength. The alloy has a low corrosion resistance and a low welding- and anodizing level.

EN AW-8079 Aluminium