1 x 1000 x 2000 mm

EN AW-5005 1 x 1000 x 2000 mm

Anodizing Quality 55HX
Material id:
1008113
Thickness
1 mm
Width
1000 mm
Length
2000 mm
Temper
H14
Surface
Anodizing Quality 55HX
Foil
Foil
Weight
≈ 5.40 kg/pc
CO2e (avg)
≈ 11.9 kg/kg
Stock
Stock material

EN AW-5005

It is good for machining and bending and has a high corrosion resistance and good for welding.

The alloy is well suited for decorative anodizing, but the colour may vary.

It is possible to get specific products for high quality facades.

We are not liable for items out of stock. The specified weight is theoretical. Please contact us if you have any further enquiries.

Technical Specifications

Alloys

Density Si Fe Cu Mn Mg Cr Zn Other
Name g/cm3 Max Max Max Max Min Max Max Max Max Rest
EN AW-5005 2.7 0.3 0.7 0.2 0.2 0.5 1.1 0.1 0.25 0.15 Al, Aluminium

Aluminium Properties

Thermal conductivity Coefficient of thermal expansion Melting point Elastic modulus Electrical conductivity
Alloy Temper W/m*K µm/(m*K) min °C KN/mm2 %IACS
EN AW-5005 Hx2 201 23.5 630 655 69 52
EN AW-5005 Hx4 201 23.5 630 655 69 52
EN AW-5005 Hx6 201 23.5 630 655 69 52
EN AW-5005 Hx8 201 23.5 630 655 69 52
EN AW-5005 Hx9 201 23.5 630 655 69 52
EN AW-5005 O 201 23.5 630 655 69 52

Mechanical properties

Tensile strength (Rm) MPa Proof stress (Rp0,2) Brinell Hardness Thickness interval Elongation A50mm Bend radius 90° Bend radius 180°
Norm Alloy Temper Rm N/mm2 MPa HBS mm % min t t
EN 485-2:2008 EN AW-5005 H14 145 185 120 48 0.2 0.5 2 0.5 2
EN 485-2:2008 EN AW-5005 H14 145 185 120 48 0.5 1.5 2 1 2
EN 485-2:2008 EN AW-5005 H14 145 185 120 48 1.5 3 3 1 2.5
EN 485-2:2008 EN AW-5005 H14 145 185 120 48 3 6 4 2 -
EN 485-2:2008 EN AW-5005 H14 145 185 120 48 6 12.5 5 2.5 -