Home / Products / Aluminium / Bars / Square Bars / 20 x 3000 mm
20 x 3000 mm

EN AW-2007 20 x 3000 mm

Material id:
1071230
Length
3000 mm
Dimension
20 mm
Process
Extruded
Temper
T4/T4511
Weight
≈ 1.14 kg/m
CO2e (avg)
≈ 8.7 kg/kg
Stock
Stock material

EN AW-2007

An aluminium and copper alloy that typically contains between 4.0 and 5.0 % copper, and it is suitable for producing machine parts, bolts and rivets. It looks very much like EN AW-2011, but it is yet a bit harder. It is a short-chipped alloy, which is suitable for treatment, threads and high machining speeds. The alloy has a low corrosion resistance and is not suitable for welding because of the high content of copper. It is not approved by the ROHS.

We are not liable for items out of stock. The specified weight is theoretical. Please contact us if you have any further enquiries.

Technical Specifications

Alloys

Density Si Fe Cu Mn Mg Cr Ni Zn Ti Bi Pb Sn Other
Name g/cm3 Max Max Min Max Min Max Min Max Max Max Max Max Max Min Max Max Max Rest
EN AW-2007 2.85 0.8 0.8 3.3 4.6 0.5 1 0.4 1.8 0.1 0.2 0.8 0.2 0.2 0.8 1.5 0.2 0.3 Al, Aluminium

Aluminium Properties

Thermal conductivity Coefficient of thermal expansion Melting point Elastic modulus Electrical conductivity
Alloy Temper W/m*K µm/(m*K) min °C max °C KN/mm2 %IACS
EN AW-2007 T3 130 23 510 640 72 34
EN AW-2007 T4 130 23 510 640 72 34

Mechanical properties

Dimension Tensile strength (Rm) MPa Proof stress (Rp0,2) Elongation Brinell Hardness Elongation A50mm
Norm Alloy Temper Min Max Rm N/mm2 MPa % min HBS % min
EN 755-2:2013 EN AW-2007 T4 - 80 370 250 8 95 6
EN 755-2:2013 EN AW-2007 T4 80 200 340 220 8 95 -
EN 755-2:2013 EN AW-2007 T4 200 250 330 210 7 95 -