EN AW-5005A 2 x 2000 x 4000 mm
EN AW-5005A
Good for machining, bending and welding and has a high corrosion resistance. For decorative anodising we recommend anodising quality instead of normal quality.
We are not liable for items out of stock. The specified weight is theoretical. Please contact us if you have any further enquiries.
Alloys
Density | Si | Fe | Cu | Mn | Mg | Cr | Zn | Other | |||
---|---|---|---|---|---|---|---|---|---|---|---|
Name | g/cm3 | Max | Max | Max | Max | Min | Max | Max | Max | Max | |
EN AW-5005A | 2.7 | Al, Aluminium | 0.3 | 0.45 | 0.05 | 0.15 | 0.7 | 1.1 | 0.1 | 0.2 | 0.15 |
Aluminium Properties
Thermal conductivity | Coefficient of thermal expansion | Melting point | Elastic modulus | Electrical conductivity | |||
---|---|---|---|---|---|---|---|
Alloy | Temper | W/m*K | µm/(m*K) | min °C | KN/mm2 | %IACS | |
EN AW-5005A | Hx2 | 201 | 23.5 | 630 | 655 | 69 | 52 |
EN AW-5005A | Hx4 | 201 | 23.5 | 630 | 655 | 69 | 52 |
EN AW-5005A | Hx6 | 201 | 23.5 | 630 | 655 | 69 | 52 |
EN AW-5005A | Hx8 | 201 | 23.5 | 630 | 655 | 69 | 52 |
EN AW-5005A | Hx9 | 201 | 23.5 | 630 | 655 | 69 | 52 |
EN AW-5005A | O | 201 | 23.5 | 630 | 655 | 69 | 52 |
Mechanical properties
Tensile strength (Rm) MPa | Proof stress (Rp0,2) | Brinell Hardness | Thickness interval | Elongation A50mm | Bend radius 90° | Bend radius 180° | |||||
---|---|---|---|---|---|---|---|---|---|---|---|
Norm | Alloy | Temper | Rm N/mm2 | MPa | HBS | mm | % min | t | t | ||
EN 485-2:2008 | EN AW-5005A | H14 | 145 | 185 | 120 | 48 | 0.2 | 0.5 | 2 | 0.5 | 2 |
EN 485-2:2008 | EN AW-5005A | H14 | 145 | 185 | 120 | 48 | 0.5 | 1.5 | 2 | 1 | 2 |
EN 485-2:2008 | EN AW-5005A | H14 | 145 | 185 | 120 | 48 | 1.5 | 3 | 3 | 1 | 2.5 |
EN 485-2:2008 | EN AW-5005A | H14 | 145 | 185 | 120 | 48 | 3 | 6 | 4 | 2 | - |
EN 485-2:2008 | EN AW-5005A | H14 | 145 | 185 | 120 | 48 | 6 | 12.5 | 5 | 2.5 | - |
EN 485-2:2008 | EN AW-5005A | H24 | 145 | 185 | 110 | 47 | 0.2 | 0.5 | 3 | 0.5 | 1.5 |
EN 485-2:2008 | EN AW-5005A | H24 | 145 | 185 | 110 | 47 | 0.5 | 1.5 | 4 | 1 | 1.5 |
EN 485-2:2008 | EN AW-5005A | H24 | 145 | 185 | 110 | 47 | 1.5 | 3 | 5 | 1 | 2 |
EN 485-2:2008 | EN AW-5005A | H24 | 145 | 185 | 110 | 47 | 3 | 6 | 6 | 2 | - |
EN 485-2:2008 | EN AW-5005A | H24 | 145 | 185 | 110 | 47 | 6 | 12.5 | 8 | 2.5 | - |