Home / Products / Aluminium / Sheets/Plates / Raw sheets/plates / 0.8 x 1000 x 2000 mm
0.8 x 1000 x 2000 mm

EN AW-1050A 0.8 x 1000 x 2000 mm

Material id:
1000023
Thickness
0.8 mm
Width
1000 mm
Length
2000 mm
Temper
H14/H24
Weight
≈ 4.32 kg/pc
CO2e (avg)
≈ 9.4 kg/kg
Stock
Stock material

EN AW-1050A

It is the most pure form of aluminium and the most common plate alloy. The alloy has a good property regarding bending and welding, and it is suitable for surface treatment.

It contains 99.5 % aluminium, and they mainly produce it in thickness from 0.5 mm - 6 mm.

EN AW-1050A DDQ:

It contains 99,5% aluminum and is produced in a very soft temper, making it suitable for deep drawing applications. Mainly produced in thickness 1,00 mm, 1,25 m, 1,05 mm and 2,00 mm.

We are not liable for items out of stock. The specified weight is theoretical. Please contact us if you have any further enquiries.

Technical Specifications

Alloys

Density Si Fe Cu Mn Mg Zn Ti Other
Name g/cm3 Max Max Max Max Min Max Max Max Max Rest
EN AW-1050A 2.7 0.25 0.4 0.05 0.05 0.05 0.05 0.07 0.05 0.03 Al, Aluminium

Aluminium Properties

Thermal conductivity Coefficient of thermal expansion Melting point Elastic modulus Electrical conductivity
Alloy Temper W/m*K µm/(m*K) min °C max °C KN/mm2 %IACS
EN AW-1050A Hx2 229 23.5 645 658 69 59.5
EN AW-1050A Hx4 229 23.5 645 658 69 59.5
EN AW-1050A Hx6 229 23.5 645 658 69 59.5
EN AW-1050A Hx8 229 23.5 645 658 69 59.5
EN AW-1050A Hx9 229 23.5 645 658 69 59.5
EN AW-1050A O 229 23.5 645 658 69 59.5

Mechanical properties

Tensile strength (Rm) MPa Proof stress (Rp0,2) Elongation Brinell Hardness Thickness interval Elongation A50mm Bend radius 90° Bend radius 180°
Norm Alloy Temper Rm N/mm2 MPa % min HBS mm % min t t
EN 485-2:2008 EN AW-1050A H14 105 145 85 - 34 0.2 0.5 2 0 1
EN 485-2:2008 EN AW-1050A H14 105 145 85 - 34 0.5 1.5 2 0.5 1
EN 485-2:2008 EN AW-1050A H14 105 145 85 - 34 1.5 3 4 1 1
EN 485-2:2008 EN AW-1050A H14 105 145 85 - 34 3 6 5 1.5 -
EN 485-2:2008 EN AW-1050A H14 105 145 85 - 34 6 12.5 6 2.5 -
EN 485-2:2008 EN AW-1050A H14 105 145 85 6 34 12.5 25 - - -
EN 485-2:2008 EN AW-1050A H24 105 145 75 - 33 0.2 0.5 3 0 1
EN 485-2:2008 EN AW-1050A H24 105 145 75 - 33 0.5 1.5 4 0.5 1
EN 485-2:2008 EN AW-1050A H24 105 145 75 - 33 1.5 3 5 1 1
EN 485-2:2008 EN AW-1050A H24 105 145 75 - 33 3 6 8 1.5 1.5
EN 485-2:2008 EN AW-1050A H24 105 145 75 - 33 6 12.5 8 2.5 -