Home / Products / Aluminium / Sheets/Plates / Raw sheets/plates / 1 x 1000 x 2000 mm
1 x 1000 x 2000 mm

EN AW-2017A 1 x 1000 x 2000 mm

Material id:
1042654
Thickness
1 mm
Width
1000 mm
Length
2000 mm
Temper
T4
Weight
≈ 5.58 kg/pc
CO2e (avg)
≈ 10.3 kg/kg
Stock
On request

EN AW-2017A

An aluminium and copper alloy with a high copper content. It is a short-chipped alloy, which is suitable for treatment. The alloy has a low corrosion resistance, and it is not suitable for welding because of the high content of copper. It is not suitable for decorative anodising

We are not liable for items out of stock. The specified weight is theoretical. Please contact us if you have any further enquiries.

Technical Specifications

Alloys

Density Si Fe Cu Mn Mg Cr Zn Other
Name g/cm3 Min Max Max Min Max Min Max Min Max Max Max Max Rest
EN AW-2017A 2.79 0.2 0.8 0.7 3.5 4.5 0.4 1 0.4 1 0.1 0.25 0.15 Al, Aluminium

Aluminium Properties

Thermal conductivity Coefficient of thermal expansion Melting point Elastic modulus Electrical conductivity
Alloy Temper W/m*K µm/(m*K) min °C max °C KN/mm2 %IACS
EN AW-2017A O 22.9 510 645 72
EN AW-2017A T4 134 22.9 410 645 72 34

Mechanical properties

Tensile strength (Rm) MPa Proof stress (Rp0,2) Elongation Brinell Hardness Thickness interval Elongation A50mm Bend radius 90° Bend radius 180°
Norm Alloy Temper Rm N/mm2 MPa % min HBS mm % min t t
EN 485-2:2008 EN AW-2017A T4 390 245 - 110 0.4 1.5 14 3 3
EN 485-2:2008 EN AW-2017A T4 390 245 - 110 1.5 6 15 5 5
EN 485-2:2008 EN AW-2017A T4 390 260 - 111 6 12.5 13 8 -
EN 485-2:2008 EN AW-2017A T4 390 250 12 110 12.5 40 - - -
EN 485-2:2008 EN AW-2017A T4 385 245 12 108 40 60 - - -
EN 485-2:2008 EN AW-2017A T4 370 240 7 - 60 80 - - -
EN 485-2:2008 EN AW-2017A T4 360 240 6 105 80 120 - - -
EN 485-2:2008 EN AW-2017A T4 350 240 4 101 120 150 - - -
EN 485-2:2008 EN AW-2017A T4 330 220 2 - 150 180 - - -
EN 485-2:2008 EN AW-2017A T4 300 200 2 - 180 200 - - -