EN AW-2017A 1 x 1000 x 2000 mm
Material id:
1042654
Thickness
1 mm
Width
1000 mm
Length
2000 mm
Temper
T4
Weight
≈ 5.58 kg/pc
Stock
On request
EN AW-2017A
A copper alloy with a high content of copper. It is a short-chipped alloy, which is suitable for treatment. The alloy has a low corrosion resistance, and it is not suitable for welding because of the high content of copper. It is not suitable for decorative anodising
We are not liable for items out of stock. The specified weight is theoretical. Please contact us if you have any further enquiries.
Technical Specifications
Alloys
| Density | Si | Fe | Cu | Mn | Mg | Cr | Zn | Other | ||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Name | g/cm3 | Min | Max | Max | Min | Max | Min | Max | Min | Max | Max | Max | Max | |
| EN AW-2017A | 2.79 | Al, Aluminium | 0.2 | 0.8 | 0.7 | 3.5 | 4.5 | 0.4 | 1 | 0.4 | 1 | 0.1 | 0.25 | 0.15 |
Aluminium Properties
| Thermal conductivity | Coefficient of thermal expansion | Melting point | Elastic modulus | Electrical conductivity | |||
|---|---|---|---|---|---|---|---|
| Alloy | Temper | W/m*K | µm/(m*K) | min °C | KN/mm2 | %IACS | |
| EN AW-2017A | O | 22.9 | 510 | 645 | 72 | ||
| EN AW-2017A | T4 | 134 | 22.9 | 410 | 645 | 72 | 34 |
Mechanical properties
| Tensile strength (Rm) MPa | Proof stress (Rp0,2) | Elongation | Brinell Hardness | Thickness interval | Elongation A50mm | Bend radius 90° | Bend radius 180° | ||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Norm | Alloy | Temper | Rm N/mm2 | MPa | % min | HBS | mm | % min | t | t | |
| EN 485-2:2008 | EN AW-2017A | T4 | 390 | 245 | - | 110 | 0.4 | 1.5 | 14 | 3 | 3 |
| EN 485-2:2008 | EN AW-2017A | T4 | 390 | 245 | - | 110 | 1.5 | 6 | 15 | 5 | 5 |
| EN 485-2:2008 | EN AW-2017A | T4 | 390 | 260 | - | 111 | 6 | 12.5 | 13 | 8 | - |
| EN 485-2:2008 | EN AW-2017A | T4 | 390 | 250 | 12 | 110 | 12.5 | 40 | - | - | - |
| EN 485-2:2008 | EN AW-2017A | T4 | 385 | 245 | 12 | 108 | 40 | 60 | - | - | - |
| EN 485-2:2008 | EN AW-2017A | T4 | 370 | 240 | 7 | - | 60 | 80 | - | - | - |
| EN 485-2:2008 | EN AW-2017A | T4 | 360 | 240 | 6 | 105 | 80 | 120 | - | - | - |
| EN 485-2:2008 | EN AW-2017A | T4 | 350 | 240 | 4 | 101 | 120 | 150 | - | - | - |
| EN 485-2:2008 | EN AW-2017A | T4 | 330 | 220 | 2 | - | 150 | 180 | - | - | - |
| EN 485-2:2008 | EN AW-2017A | T4 | 300 | 200 | 2 | - | 180 | 200 | - | - | - |
