EN AW-2007

Material id: 1071246

Width

100.0 mm

Length

3000.0 mm

Process

Extruded

We have a profound stock range of square bars, and mainly we offer them in 2000 and 6000 alloys. Essentially, they exist in all sizes from 8 mm and up to 200 mm and often in lengths of 3000 mm and 6000 mm. If you request other dimensions or alloy types than the once introduced - you are welcome to contact us.


  • Width: 100.0 mm
  • Length: 3000.0 mm
  • Process: Extruded
  • Weldability: Low
  • Corrosion: Low
  • Cut/drilling: High
  • Surface: Low
On request

EN AW-2007

A copper alloy that typically contains between 4.0 and 5.0 % copper, and it is suitable for producing machine parts, bolts and rivets. It looks very much like EN AW-2011, but it is yet a bit harder. It is a short-chipped alloy, which is suitable for treatment, threads and high machining speeds. The alloy has a low corrosion resistance and is not suitable for welding because of the high content of copper. It is not approved by the ROHS.


We are not liable for items out of stock. The specified weight is theoretical. Please contact us if you have any further enquiries.

Alloy - Alloys

Si
Min
0.4
Max
0.8
Fe
Min
-
Max
0.8
Cu
Min
3.3
Max
4.6
Mn
Min
0.5
Max
1
Mg
Min
0.4
Max
1.8
Cr
Min
-
Max
0.1
Zn
Min
-
Max
0.2
Ni
Min
-
Max
0.2
Bi
Min
-
Max
0.2
Pb
Min
0.8
Max
1.5
Sn
Min
0.2
Max
-
Others
Min
0.3
Max
-

Alloy - Aluminium Properties

Alloy
EN AW-2007
Temper
T3
Thermal conductivity
W/m*K
130
Coefficient of thermal expansion
µm/(m*K)
23
Annealing
Min
-
Annealing
Max
-
Melting point
Min
510
Max
640
Melting point
Max
640
Elastic modulus
KN/mm2
72
Electrical conductivity
%IACS
34

Alloy
EN AW-2007
Temper
T4
Thermal conductivity
W/m*K
130
Coefficient of thermal expansion
µm/(m*K)
23
Annealing
Min
-
Annealing
Max
-
Melting point
Min
510
Max
640
Melting point
Max
640
Elastic modulus
KN/mm2
72
Electrical conductivity
%IACS
34