|
|
|
 |
|
|
 |
|
|
|
|
|
|
 |
| |
|
Cylinder Tubes |
|
|
| |
|
Special product - High precision
The cylinder tube is a special product and a good example of the broadness of our product range. This product is characterised by its high precision, thus it is often used as control and operating cylinders.
Special dimensions and formats available on request.
Delivery time about 1 week. |
|
|
| | | |
|
 Aluminium Cylinder Tubes - EN AW-6060 T6Manufacturing length 3050 mm
EN 573-3, EN 755-1, 755-2 |
| |
|
|
|
|
| | | |
|
Aluminium Profile Cylinder Tubes EN AW-6060 T6Manufacturing length 3000 mm EN 573-3, 755-9, 755-1, 755-2
For metric thread |
|
|
| |
|
|
|
|
| |
|
For self-cuting screws |
|
|
| | | |
|
Specification |
|
|
Cylinder tubes for any use |
|
|
Additional technical data and benefits |
| |
|
| Aluminium cylinder tubes: |
|
| Alloy: |
EN AW 6060 T6 |
| |
|
Inside
Ø tolerance: |
ISO H11 |
| |
|
| Roughness: |
Ra < 1 μm |
| |
|
| Surface: |
Fine-drawn, no covering |
| |
|
| Surface: |
Fine-drawn, internally and externally hard |
| |
|
| Layer thickness: |
25 μm ± 5 μm |
| |
|
| Strength: |
450 HV |
| |
|
| Straightness: |
0,35 mm/m. | |
|
|
| |
- Nominal width 20-320 mm
- Wall thickness 1,5-10 mm
- Length up to 6000 mm
|
| |
- Aluminium Cylinder tubes of high precision are always in stock.
|
| |
| A technically extensive, high quality range includes different formats to meet individual problem solutions. |
| |
- Chamber-pressed
- Chamber-pressed and drawn
- Piercing-pressed and drawn
- Non-covered
- Hard anodized
| |
|
|
| |
- High wear resistance
- Fine tolerances
- High quality surface
- Excellent low friction properties
- Lightweight
- Pressure and corrosion resistant
| | |
|
|
| <
| | | | |
